MIMAKI JV34-260 - Setting Double-Sided Printing Mode Parameters; Configuring Print of Back Side, Ink Layers, and Media Detect

4-8
Setting the Double Side Mode
Set for double sided printing.
1
Press key in Local.
2
Press to select [MACHINE SETUP].
3
Press the key.
4
Press to select [Double Side Mode].
5
Press the key.
6
Press the key.
• The setting “Print Of Back Side” is selected.
7
Press to select “ON”.
• Select ON to print on double side.
8
Press the key.
9
Press to select [INK LAYERS].
10
Press the key.
• The setting “INK LAYERS” is selected.
Setting Description
Print of Back Side Select "ON" to print on the back side.
INK LAYERS Set the number of ink layers to print on the back side.
MEDIA DETECT
When the printing media reaches the specified length, media is detected again to adjust the
media misaligned position by skew or others.
FUNCT I ON
SETUP <ENT>
FUNCT I ON
MACH I NE S E TUP < ENT >
MACH I NE S E TUP
DRY FAN < e n t >
MACH I NE S E TUP
Doub l eSi de Mode<en t >
Doub l eSi de Mode
Pr intOfBackSide<ent>
Doub l eSi de Mode
Pr intOfBackSide :OFF
Doub l eSi de Mode
Pr intOfBackSide :ON
Doub l eSi de Mode
Pr intOfBackSide<ent>
Doub l eSi de Mode
INK LAYERS <ent>
Doub l eSi de Mode
INK LAYERS :2