Printing on Double Side
4-7
1
1
4
Double Sided Printing
6
8
Cut several places of media along the cutting line.
• Along the printed cutting line, cut several places of media with a cutter.
9
Cut off the media.
• Cut off the media at the following position.
When the narrow take-up device is used : Cut off at a position of approximately 1000 mm or more
from the cutting line.
When the heavy-duty take-up device is used : Cut off at a position of approximately 1800 mm or more
from the cutting line.
When the take-up device is not used : Cut off at a position of approximately 400 mm or more
from the cutting line.
• Do not cut the edge of the media. The edge may be lifted and may scrape against the
head.
For the narrow take-up device : approx. 1000 mm or more
For the heavy-duty take-up device : approx. 1800 mm or more
Without the take-up device : approx. 400 mm or more
Cut off here
Cutting line
To Next Page
Loading...
