MIMAKI JV34-260 - Setting Color Pattern; When You Use Ink Other than Sublimation Dye Ink

3-18
Setting Color Pattern
When you use ink other than Sublimation dye ink
It is set whether a color pattern is printed on the right edge of a media.
1
Press the key in LOCAL.
2
Press the key.
3
Press to select one of the types (1 to 4) and press the key.
4
Press to select [COLOR PATTERN].
5
Press the key.
6
Press to select a set value.
• Set Value : HOST or ON, OFF
7
Press the key.
8
Press the key several times to end the setting.
• When you give priority to the setting at the RIP software side, make the setting value “Host”.
18mm
Origin
Image
FUNCT I ON
SETUP <ENT>
SETUP
SELECT : TYPE . 1
[1]
COLOR PA T TERN < e n t >
[1]COLOR PATTERN
SETUP :
HOST
[1]COLOR PATTERN
SETUP :
ON
[1]
COLOR PA T TERN < e n t >