This chapter
describes the items required to use this machine more comfortably, which are the
methods for the daily care, the maintenance of the ink unit etc.
Maintenance .................................................5-2
Precautions for Maintenance ...................... 5-2
About Cleaning Solution .............................. 5-2
Cleaning the Exterior Surfaces ................... 5-3
Cleaning the Platen ..................................... 5-3
Cleaning of after heater cover and
pre heater cover .......................................... 5-3
Cleaning the Media Sensor ......................... 5-4
Cleaning the Media Holder .......................... 5-4
Maintaining the Capping Station ...................5-5
Cleaning the Wiper and Cap ....................... 5-5
Replacing the wiper ..................................... 5-7
Washing of Head nozzle ............................. 5-8
Washing the Ink Discharge Passage
(PUMP Tube Washing) ............................. 5-10
When the Machine Is Not Used for a
Long Time (CUSTODY WASH) ................ 5-12
Cleaning the Ink Head and the Area
around It ......................................................5-14
When Nozzle Clogging Cannot Be Solved . 5-16
FILL UP INK .............................................. 5-16
DISCHARGE & WASH ................................5-17
Supplying the Machine with Ink Anew .........5-19
Automatic Maintenance Function ................5-20
Setting the Refreshing Intervals .................5-20
Setting the Tube Washing Intervals ...........5-21
Setting the Cleaning Intervals ....................5-22
Other Maintenance Functions .....................5-23
Changing the Time When a Warning about
Wiper Replacement Is Issued ....................5-23
Setting the Head Selection ........................5-24
Setting the Display of Media Residual .......5-25
If a Waste Ink Tank Confirmation Message
Appears .....................................................5-27
To change Sb52 ink color ..........................5-31
To use sublimation transfer ink with more
stable quality ..............................................5-32
Set the interval to display the warning
message ....................................................5-33
Replacing the Cutter Blade .........................5-34
Chapter 5
Maintenance
To Next Page
Loading...
