MIMAKI JV34-260 - Adjusting Print Misalignment for Double-Sided Output; Checking and Adjusting Scan;Feed Misalignment

Printing on Double Side
4-14
Adjust the misalignment during printing on back side (Only for translucent media)
If the print is misaligned in the scan direction or in the feed direction during printing image data on back side,
adjust the misalignment as follows.
 How to check the misalignment of the print
Check the misalignment during printing image data with
the Misalignment / Media stretch check lines.
 How to adjust the misalignment of the print
Press the to adjust the misalignment, and press the key.
To adjust the misalignment in the scan direction : Press the .
To adjust the misalignment in the feeding direction : Press the .
Misalignment / Media
stretch check line
Press the to adjust the scan direction (Y).
Press the to adjust the feed direction (X).
X:+

1.0mm

-
Y:+

1.3mm

-
Press the key.