MIMAKI JV34-260 User Manual

3-25
1
1
3
Convenient use
5
6
Setting Media Detection
Set the method for detecting a media when the media is set and the detecting type when the media is cut.
1
Press the key in LOCAL.
2
Press the key.
3
Press to select one of the types (1 to 4) and press the key.
4
Press to select [MEDIA DETECT].
5
Press the key.
6
Press the key.
• The setting screen of media detection appears.
7
Press to select a set value.
• SELECT : Select either a roll media or leaf media by pressing when the media is detected.
• WIDTH : The width of media is only detected without any key input when the media is detected.
(Detecting is started automatically by lowering the clamp lever.)
8
Press the key.
9
Press to select [CUTTING DETECT].
10
Press the key.
11
Press to select a set value.
• Set Value:BOTH EDGE / LEFT EDGE / RIGHT EDGE / NONE
12
Press the key.
13
Press the key several times to end the setting.
• If the set value is set to others than "BOTH EDGE" in [CUTTING DETECT], although the cutting time
is shortened, cutting remainders may happen due to the media skew.
FUNCT I ON
SETUP <ENT>
SETUP
SELECT : TYPE . 1
[1]
MED I A DE T EC T < e n t >
[1]MEDIA DETECT
DETECT METHOD <e n t >
[1]MEDIA DETECT
DETECT METHOD :
SELECT
[1]MEDIA DETECT
DETECT METHOD <e n t >
[1]MEDIA DETECT
CUT T I NG DETECT < e n t >
[1]MEDIA DETECT
DETECT :
BOTH EDGE

MIMAKI JV34-260 Specifications

General

Brand	MIMAKI
Model	JV34-260
Category	Printer
Language	English