3-28
Machine Settings
Common settings are functions for using this machine easily.
The following items can be set in Machine settings.
Item
Set value
*1
*1. The setting at the time of purchase is indicated with the underline.
Meaning
DRY FAN
*2
*2. DEODORIZE FAN is optional.
STOP TIME
0 ~ 10
~ 240min/
CONTINUE
The time until the rotation of the drying fan stops after
printing has been completed is set.
RENEW
ON / OFF
The present operating state of the drying fan is switched.
Feeding/
Tak e U P
UNIT SELECT
FEEDING：ON / OFF
TAKE-UP：ON / OFF
When using a heavy roll medium (the width is 1.6m or
more), set "ON" to "FEEDING" and "TAKE-UP".
TensionBar-
POS.
LOW / HIGH
Set the operating position of the tension bar for the
heavy-duty take-up device.
Double Side
Mode
Print Of Back
Side
ON / OFF
Perform setting related to double-faced printing.
P.4-2For details, refer to .
INK LAYERS 1 ~ 2 ~ 9
MEDIA
DETECT
OFF/
10 ~ 10000mm
DRYNESS FEED
ON / OFF
It is set whether a medium is fed for it to be dried after
printing has been completed.
CONFIRM. FEED
ON / OFF
A feeding method for confirming the result of test printing
can be set.
When this is turned ON, the screen changes to "BACK
FEED" for returning a medium to the original position by
pressing key.
TIME SET
The present date and time are set.
UNIT
SETUP
TEMP.
°C (Centigrade)
/°F (Fahrenheit)
A unit for displaying temperature is set.
LENGTH
mm
/ inch
A unit for displaying length and area is set.
STAMP SETUP
ON / OFF
The setting for the output date and printing conditions to
be output after printing has been completed is
configured.
Waste Ink Warning
ON
/ OFF
It is set whether the confirmation message of the waste
ink tank is displayed.( P.3-39)
CART.PRIORITY
*3
*3. This setting is only available for 4-color set.
INK LEVEL
EXP. DATE
Condition of the ink cartridge to be used first by the
double-cartridge automatic switching function can be
selected. ( P.3-39)
MACHINE NAME
01
~ 99
The names of machines (machine No.) are set for
recognizing them when they are connected to one
another with a USB 2.0 interface used.
KEY BUZZER
ON
/ OFF
A buzzer sound when keys are pressed is set.
ENV. TEMP.
Not wait ARR.
Wait arrival
Sets the operation when an error indicating that the
ambient temperature is out of the usable temperature
range occurs. ( P.3-39)
To Next Page
Loading...
