Front cover
Open the cover in setting of medias, taking of measures
against jamming of medias or in maintenance inside the
station.
Even when the power switch is off, keep this cover and
the other covers closed.
Operation panel
This panel has the operation keys required for
operating the machine and the LCDs for
displaying setting items, etc.
Clamp lever (front)
Moves the pinch rollers up and down to hold
or release the media.
Power switch
*1
Turns on/off the power to the machine.
Waste ink tank
Waste ink gathers in this tank.
Stand
Supports the main body of the machine. It is
provided with casters that are used to move
this machine.
Heavy-duty take-up device
Take up the output drawn with a heavy roll medium
(the medium width is 1.6m and more) automatically.
Maintenance cover
Open the cover in maintenance.
Even when the power switch is off, keep all covers
closed.
Platen
The printed media is sent out, sliding on the platen. Three heaters are installed inside the platen.
Print heater/ Post-heater
Fixes and dries the ink on the currently produced print. (Located inside the platen)
Ink cartridges
Each cartridge contains an ink of a
particular color.
Cartridge protection cover
This prevents an injury or breakage of the
machine due to a protrusion of the 440 cc
cartridge.
(It is located under the ink cartridge.)
*1 : The power switch under the operation panel lights in green when the power is turned on, and blinks when the
power switch is turned off. The ink clogging prevention function is periodically operated even when the power
switch is OFF if the main power switch keeps being ON. (Auto maintenance function) P.1-5
Narrow take-up device
Take up the output drawn with a narrow
roll medium (less than1.6m)
automatically.
Drying fan
To Next Page
Loading...
