Inserting ink cartridges
1-13
1
Before Use
3
4
5
6
For Ink cartridge lamps
The condition of the ink cartridges set in the machine is confirmable with lamps located over the ink cartridges.
Caution in handling of ink cartridges
Condition of Lamp Description
Upper row
Red lamp
OFF No error
Blinking
One of the following errors occurs.
• Ink near-end
•Ink end
• Expiration of a term of ink validity (one
month)
ON
One of the following errors occurs.
• No ink left
• No ink cartridge inserted
• Other ink errors ( P.6-5)
Lower row
Green lamp
OFF No error
ON
When used with 4-color ink set, the
machine supplies ink from the ink
cartridge with lower ink. ( P.3-42)
In this case, the cartridge being used
lights in green.
• An organic solvent is used in solvent ink. When ink sticks on skins, wash it with soapy water
immediately then rinse it off with water fully. If you get ink in your eyes, immediately wash your eyes
with a lot of clean running water for at least 15 minutes. In doing so, also wash the eyess to rinse ink
away completely. Then, consult a doctor as soon as possible.
• Use genuine ink cartridges for this machine. This machine functions by recognizing the genuine ink
cartridges. In case of troubles caused by modified ink cartridges or the like, it shall be out of the
warranty even within the warranty period.
• If the ink cartridge is moved from a cold place to a warm place, leave it in the room temperature for
three hours or more before using it.
• Be sure to thoroughly consume the ink in the ink cartridge, once it is opened, within three months. If an
extended period of time has passed away after opening the cartridge tank, printing quality would be
poor.
• Make sure to store ink cartridges in a cool and dark place.
• Store ink cartridges and waste ink tank in a place that is out of the reach of children.
• Request an industrial waste processor for processing of empty ink cartridges.
• Do not shake ink cartridges violently. This may result in ink leakage from the ink cartridges.
• Never refill the ink cartridges with ink. This may result in troubles.
MIMAKI will not bear any responsibility for any damage caused by the use of the ink cartridges refilled
with ink.
• Do not touch or stain the contacts of the ink cartridge. This may cause damages on printed circuit
boards.
• Do not disassemble the ink cartridges.
To Next Page
Loading...
