Machine Settings
3-29
1
1
3
Convenient use
5
6
Setting the DRYING FAN
The exhaust fan operates during printing. After printing has been complete, it operates according to the setting
of "Stop timer".
The following two items can be set for the drying fan.
• STOP TIME : The time until the exhaust fan stops after printing has been completed is set.
• RENEW : When this is set to "ON", the exhaust fan can operate while printing is not performed.
1
Press the key in LOCAL.
2
Press to select [MACHINE SETUP].
3
Press the key twice.
4
Press to select an item to set.
STOP TIME : The time until the exhaust fan stops after printing has been completed is set.
RENEW : Select this when you want to operate the exhaust fan.
5
Press the key.
6
Press to select a set value.
STOP TIME : 0 to 240 seconds or continuous running.
RENEW : When you operate the exhaust fan, select "ON". When you stop the fan, select "OFF".
7
Press the key.
8
Press the key several times to end the setting.
• The exhaust fan is an option contained in the exhaust unit.
• When this machine is equipped with a exhaust fan, the fan operates in cooperation with the settings
configured here.
To Next Page
Loading...
