MIMAKI JV34-260 - To Change Sb52 Ink Color

Other Maintenance Functions
5-31
1
1
1
5
Routine Maintenance
To change Sb52 ink color
To change Sb52 ink color, perform the procedures below:
1
“Discharge” the remaining ink in the machine, and “Wash” the head or the tube.
• See P.5-17 “DISCHARGE & WASH”.
2
Fill ink.
• See P.5-19 “Supplying the Machine with Ink Anew”.
When you change the items below, the work by the service person is required. Contact a
distributor in your district or our office to call for service.
• When you change the ink set from “four-color model” to “six-color model” etc.
• When you change the ink type from SS21 ink to Sb52 ink etc.
• When washing, use eight special cleaning solution cartridges (sold separately).
Wash with the proper cleaning solution cartridge for the used ink type.
Ink Type Cleaning Solution Type
Solvent ink (SS21) MILD SOLVENT Cleaning Solution Cartridge (SPC-0294)
Sublimation dye ink (Sb52) Aqueous cleaning solution cartridge (SPC-0259)