MIMAKI JV34-260 - Other Maintenance Functions; Changing the Time When a Warning about Wiper Replacement Is Issued

5-23
1
1
1
5
Routine Maintenance
Other Maintenance Functions
Changing the Time When a Warning about Wiper Replacement Is Issued
The wiper is consumable.The head can easily become dirty in a dusty environment.
In addition, the head cannot be cleaned adequately with a bent or worn wiper used.Wiper levels can be set so
that a warning about wiper replacement is issued earlier than the standard according to the operating
environment.
1
Select [WIPER LEVEL] of the maintenance menu.
(1) Press the key in LOCAL.
(2) Press to select [MAINTENANCE] and press the key.
(3) Press to select [WIPER LEVEL].
2
Press the key.
3
Press to set a wiper level.
• Set value : 1/10 to 10/10
4
Press the key.
5
Press the key several times to end the setting.
10/10
Displays the wiper replacement warning when wiping has been performed the standard number of
times. (Initial value)
9/10
Displays the wiper replacement warning when wiping has been performed nine tenths of the
standard number of times.
8/10
Displays the wiper replacement warning when wiping has been performed eight tenths of the
standard number of times.
1/10
Displays the wiper replacement warning when wiping has been performed one tenth of the
standard number of times.
Normal wiper Deformed wiper
WI PER LEVEL
LEVEL : 1
0 /10
WI PER LEVEL
LEVEL :
9 /10
MA I N T ENANCE
WI PER LEVEL < e n t >