7-2
Specifications
Machine specifications
Item JV34-260
Print head
Method Drop-on-demand piezoelectric print heads
Specification 2 head
Drawing mode (scan x feed)
720 x 540dpi / 540 or 720 x 720dpi / 540 x 900dpi / 540 or 720 x 1080dpi /
720 x 1440dpi / 1440 x 1440dpi
Usable inks
Dedicated solvent ink. SS21 ink (Y,M,C,K)
Dedicated aqueous ink.
Sublimation dye ink (Sb52): 4 colors (Y,M,Bl,K)
6 colors (Y,M,Bl,K,LBl,Lm)
6 colors (Y,M,BB,K,LBB,Lm)
Ink supply
Supplying from ink cartridges through tubes.
Ink cartridge replacement type :
Only at 4 colors: Supplying by Toggle switchover with 2 cartridges/color
Capacity of
ink car-
tridge
Dedicated solvent ink 440cc 2 cartridges for each color, 880cc/1 color
Dedicated aqueous ink
6-color set of cartridges :
440cc 1 cartridge for each color (2 cartridges, 440cc only for magenta and cyan)
4-color set installed :
440cc 2 cartridges for each color
Media type
Dedicated solvent ink Tarpaulin, FF, PVC
Dedicated aqueous ink Photo-paper , Synthetic paper , Duplex paper
Max. printing width 2632mm
Roll Media
size
Maximum 2642mm
Minimum 210mm
Thickness 1.0 mm or less
Roll outside diameter
250mm or less (when using narrow take-up unit)
250mm or less (when using heavy media take-up unit)
Roll weight
*1
25kg or less (when using narrow take-up unit)
100kg or less (when using heavy media take-up unit)
Roll inside diameter 3 or 2 inches
Printing surface Side facing outward
Roll end treatment
The roll end is gently fixed to the core with weak-adhesive tape or weak glue for
easy removal.
Leaf media
size
Maximum 2642mm
Minimum 210mm
Margin
Leaf media Left end and right end : 25 mm (Default) Front : 40.0 mm Rear : 100 mm
Roll media Left end and right end : 25 mm (Default) Front : 40.0 mm Rear : 100 mm
Distance
accuracy
Absolute accuracy Whichever the larger one of ± 0.3 mm or ± 0.3 % of the designated
Reproducibility Whichever the larger one of ± 0.2 mm or ± 0.1 % of the designated
Perpendicularity ± 0.5 mm / 1000 mm
Media skew 5 mm or less / 10 m variable
Head height adjustment
L range : 2.0mm / 3.0mm 2 levels adjustable
H range : 3.0mm / 4.0mm 2 levels adjustable
Cutting of media
Cutting of Y direction by the head cutter,
Cutting accuracy (steps) : 0.5 mm or less.
Media delivery
Take-up device supplied as a standard accessory
(switching possible between face in and face out).
Waste ink tank Bottle type ( 2,000 cc)
Interface USB 2.0
Command MRL- III
Noise
during standby Less than 58 dB (FAST-A, Front & Rear & Left & Right 1 m)
during continuous printing
Less than 65 dB
during discontinuous printing
Less than 70 dB
Safety Standard
VCCI-Class A, FCC-Class A, UL 60950, CE Marking (EMC,Low Voltage Direc-
tive,Machinery Directive), CB Report, RoHS
Power AC100 - 120 ± 10% , AC220 - 240 ± 10% , 50/60Hz ± 1Hz , 15A or less
Power consumption
*2
1333 W or less
To Next Page
Loading...
