MIMAKI JV34-260 - Printer Power On and Off Procedures; Printer Power-On Procedure; Step-by-Step Guide to Powering On the Printer

2-4
Turning the Power ON/OFF
Turning the Power ON
This machine is provided with the following two power switches:
Main power switch:It is located on the side of this machine.Keep this switch ON all the time.
Power switch : Normally, use this switch to turn the power ON/OFF.
The power switch lights in green when the power is ON and blinks in green when it is
OFF.
The nozzle clogging prevention function periodically operates even with the power switch
turned OFF when the main power switch is turned ON (the power switch blinks in green).
1
Turn the main power switch ON.
• Set the main power switch located on the side of this
machine to the “I” side.
• The firmware version is displayed when the power is turned ON.
• The machine performs its initial operation.
2
The machine enters LOCAL.
3
Turn ON the power of the connected PC.
• Turn the power ON after the front cover and maintenance cover are closed.
• The head nozzle may result in nozzle clogging if the main power switch is left OFF for a long time.
Main power
switch
JV34-260 V* . * *
<LOCAL . 1> [ #01 ]