3-42
Switch Setting of Ink Supply Path
For the ink supply, condition of the ink cartridge to be used first by the double-cartridge automatic switching
function can be selected.
This setting is only available for 4-color set.
1
Press the key in LOCAL.
2
Press to select [MACHINE SETUP].
3
Press the key.
4
Press to select [CART.PRIORITY].
5
Press the key.
6
Select the condition of ink to be used first by pressing
the keys.
INK LEVEL : Low ink cartridge is used first
EXP. DATE : Close-to-date ink cartridge is used first
7
Press the key.
8
Press the key several times to end the setting.
• When expired ink cartridge is set, the expired cartridge is used first regardless of the setting below.
• When the optional bulk ink system (MBIS1) is used and the MBIS1 is set in both slots, the setting
below is effective.
• When both an ink cartridge and the bulk ink system (MBIS1) are set in the supply paths of the same
color, see the next page.
To Next Page
Loading...
