Machine Settings
3-33
1
1
3
Convenient use
5
6
Setting CONFIRM. FEED
Set whether media feeding is performed for checking the result after test printing or not.
1
Press the key in LOCAL.
2
Press to select [MACHINE SETUP].
3
Press the key.
4
Press to select [CONFIRM. FEED].
5
Press the key.
6
Press to select ON.
• When selecting OFF, proceed to Step 9.
7
Press the key to set [BACK FEED].
8
Press to select ON/OFF.
• When the media return feeding is set "ON", the media fed by the
confirmation feeding is slightly returned.
• If it is not desirable to return the media, set it to "OFF".
9
Press the key.
10
Press the key several times to end the setting.
To Next Page
Loading...
