Moving This Machine
1-3
1
Before Use
3
4
5
6
Moving This Machine
Move this machine according to the following steps when this machine needs to be moved on the same step-
free floor.
1
Raise the level feet.
2
Move this machine as shown in the figure.
• For safety, be sure to operate it with 4 people or more.
• Do not push the cover to move this machine since the cover
may be broken.
3
Move the level feet down to fix the device.
• When the machine is moved to any place other than on the same step-free floor, contact your
distributor or our service office.
If you move it by yourself, failure or damage may occur.
Be sure to request your distributor or our service office to move this machine.
• When moving this machine, take care that it does not receive a significant impact.
• Be sure to fix the level feet after moving of this machine.If you start to print with the level foot not being
fixed, the device may start to move.
To Next Page
Loading...
Need help?
General