MIMAKI JV34-260 - Page 90

Setting Cleaning during Printing
3-24
10
Press the key.
11
Press the keys.
• The set display of TEMP difference is displayed.
12
Press the key.
13
Press to set temperature difference.
• When the set temperature of the print heater is higher than the
ambient temperature and the difference between the two exceeds
a specified temperature, the regular wiping function is activated.
• When setting "0" to the temperature difference, regardless of the
set temperature of the print heater, fixed period wiping operation is
performed when it reaches the specified number of scan.
14
Press the key.
15
Press the key several times to end the setting.
WI P I NG
SCAN COUNT <e n t >
WI P I NG
TEMP.di f ference<ent>
WI P I NG
TEMP . D i f f e r en c e=2
0  C
WI P I NG
TEMP . D i f f e r en c e=2
0  C
WI P I NG
TEMP.di f ference<ent>