Machine Settings
3-31
1
1
3
Convenient use
5
6
Setting of Tension Bar Position
Set the operating position of the tension bar for the heavy duty take-up device while printing.
1
Press the key in LOCAL.
2
Press to select [MACHINE SETUP].
3
Press the key.
4
Press to select [Feeding/TakeUP].
5
Press the key.
6
Press to select [TensionBar-POS. ].
7
Press the key.
8
Press to select setting.
9
Press the key.
10
Press the key several times to end the setting.
• When changing the setting, be sure to understand the setting contents referring to P.2-18 “Setting the
active position of the take-up tension-bar” before change it.
To Next Page
Loading...
