2-18
Adjust the take-up/ feeding tension-bar
To take-up stably for the various media, adjust the take-up/ feeding tension-bar.
Setting the active position of the take-up tension-bar
(For the setting, see P.3-31)
Change the settings depending on the media type.
For the stretchy media, it is better to set the active position of the tension-bar to [HIGH].
Media Type Setting Description
FF Set properly depending on the media.
Tarpaulin /
Mesh Tarpaulin
[HIGH]
Ink-absorbable media may expand and affect feeding and take-up of the
media.
Setting HIGH may loosen the media turning angle at the tension-bar, and it
may feed / take up smoothly.
PVC Set properly depending on the media.
Sublimation transfer
paper
[LOW]
To fix the cockling made by ink, it is necessary to secure the feeding length
to the take-up device.
Setting LOW may secure the enough feeding length to fix the cockling.
To Next Page
Loading...
