MIMAKI JV34-260 - Securing Media on the Roll Shaft; Positioning and Securing Media on Roll Shaft

2-12
4
Set a media on the roll shaft.
(1) Put the roll shaft through a paper core.
(2) Slide the media to the center of the roll shaft.
(3) Push the heavy-dury roll holders on both sides into the
paper core.
(4) Tap the heavy-duty roll holders with the supplied
hammer to push into the paper core.
5
Put the roll shaft with the media on the heavy-duty feeding device.
• Fitting the A part of the roll shaft to the B part bearing of the machine, put it on.
• Put the shaft on gently, not roughly.
Paper core
Apart
B part