MIMAKI JV150-130 - Automatic Maintenance Function; Setting the Refreshing Intervals; Reset the Set Value

Chapter 4 Maintenance
4-13
1
2
2
4
5
6
Reset the set value
1
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press , and press the key.
• “NOZZLE RECOVERY” will be selected.
3
Press twice, and press the
key.
• “RESET” will be selected.
4
Press and
(PAGE>)
(<<)
to selet theNozzle line that
need reset, and press the key.
• A reset confirmation message will be displayed.
5
Press the key.
6
Press the key several times
to end the setting.
Automatic Maintenance
Function
To use this machine comfortably, you can set various
maintenances to be performed automatically.
Here, set performing intervals of various automatic
maintenances.
You can prevent troubles such as ink clogging by
performing automatic maintenance periodically (automatic
maintenance function).
For the auto maintenance functions, the following items
can be set:
Setting the Refreshing Intervals
The interval between each operation of ejecting a small
amount of ink from the nozzles to prevent nozzle clogging
is set.
1
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press twice, and press the
key.
• “AUTO MAINTENANCE” will be selected.
3
Press the key.
• “REFRESH” will be selected.
4
Press to set the refreshing
interval, and press the key.
• Set value : The set value will differ according to
the ink type being used.
5
Press the key several times
to end the setting.
• When you perform maintenance manually, after
manual maintenance is completed and when time
set with the automatic maintenance function has
passed, maintenance starts automatically.
• If using the Automatic Maintenance Function,
make sure that the maintenance washing liquid is
set. If the maintenance washing liquid is not set,
tube washing operation will not be regularly
conducted and the passage could be clogged.
Function name Descriptions
REFRESH
The interval between each refreshing
operation is set.
TUBE WASH The activation interval for tube washing is set.
CLEANING
(Interval)
The interval between each cleaning operation
is set.
CLEANING (
Type ) The cleaning type is set.
• If the “Check waste ink” warning message is
displayed, the operation set in the auto
maintenance function is not carried out. Perform
the operations of P.4-16 “Replace the waste ink
tank with another” if required.
• When the power switch on the front of the machine
is turned off, check the waste ink tank.