MIMAKI JV150-130 - Chapter 4 Maintenance

This chapter
describes the items required to use this machine more comfortably, which are the
methods for the daily care, the maintenance of the ink cartridges etc.
Maintenance .................................................4-2
Precautions for Maintenance ...................... 4-2
About Cleaning Solution.............................. 4-2
Cleaning the Exterior Surfaces ................... 4-2
Cleaning the Platen ..................................... 4-2
Cleaning the Media Sensor ......................... 4-3
Cleaning the Media Press ........................... 4-3
About MAINTENANCE MENU ......................4-4
MAINTENANCE MENUs at-a-glance .......... 4-5
Maintaining the Capping Station ...................4-6
Cleaning the Wiper and Cap ....................... 4-6
Washing the Head Nozzle ........................... 4-7
Washing the Ink Discharge Passage .......... 4-8
When the Machine Is Not Used for a
Long Time ................................................... 4-9
Cleaning the Ink Head and the Area
around It ......................................................4-11
Nozzle Recovery Function ...............................4-12
Reset the set value ....................................4-13
Automatic Maintenance Function ................4-13
Setting the Refreshing Intervals .................4-13
Setting the Tube Wash Intervals ................4-14
Setting the Cleaning Intervals and Type ....4-14
Fill up Ink .....................................................4-14
Replacing consumables ..............................4-15
Replacing the wiper ...................................4-15
If a Waste Ink Tank Confirmation Message
Appears .....................................................4-16
Replacing the waste ink tank before the waste ink
tank confirmation message is displayed
..........4-17
Replacing the Cutter Blade ........................4-18
Chapter 4
Maintenance