Mimaki Europe B.V.
Sign Graphics Products
Highly versatile printer
• Larger Ink drop
• 3 different drop sizes are automatically selected from 7drop sizes, depending
on the selected print quality (profile)
• When working with SS21, the 7 drop sizes are 4pl,7pl,8pl,14pl,16pl,24pl, and 35pl
• High speed printing with high densities is attained by taking advantage of the maximum
drop size of 35pl
• The variable dot technology, with a maximum dot size of 35pl, is used for the highest
productivity of 45.4m²/h with SS21/BS3 and 48m²/h with SB53
• This gives the printer a wide coverage, from high resolutions with high qualities to low
resolution printing, with higher densities
8
Case 1 : Maximum dot size =21pl Case 2 : Maximum dot size =35pl
Large
21ｐｌ
Middle
14ｐｌ
Small
4ｐｌ
1 /360 inch
1 /360
inch
Large
35ｐｌ
Middle
14ｐｌ
Small
4ｐｌ
1 /360 inch
1 /360
inch
Low density due to an gap between the dots
↓
Not suitable for high speed mode (low resolution)
High density with no gap between the dots
↓
Suitable for High speed mode
To Next Page
Loading...
