MIMAKI CJV300-160 - Page 48

© 2014 MIMAKI ENGINEERING CO.,LTD. 7.2 P.10
7.2 Performing a Test Print
R.1.0
1
2
3
4
5
6
7
3. Check the results of the test print.
If the result is normal, the operation is finished.
If the result is abnormal, execute head cleaning (7.3 (p.11)) or
ink filling (Operation Manual).
Ink is
blocked
Abnormal pattern
Nozzle is
dirty
Normal pattern
INSTALLATION GUIDE > Outputting Plots > Performing a Test Print
Model
CJV300
Issue
2014.09.01
Revised F/W ver. 1.30 Remark
1.0
Rev.