MIMAKI TX-Y6018P - Installation Precaution

1.3 Warning and Precaution for Use Continued
• The machine should be grounded, according to the local safety electrical
connection regulation. The ground voltage should be less than 3V.
• Setthemachineonsmoothatceramictileorceramicground.
• Usespeciedanti-staticoormattominimizeharmfulstaticbuild-up.
• Be careful not to damage, break or modify the power cable. Also do not place
 anyheavyobjecton,heat,orpullthepowercable.Doingsocancausepowercable
 breakage,resultinginreorelectricshock.
• Usethismachinewiththeindicatedpowerspecications:AC220V,50/60Hz
• Avoid damp locations when using this machine. Do not splash water onto this
 machine.Itmaycausere,electricshockormalfunctionofthismachine.
• Useofthemachinewhenitissueringsomeproblemindicatedbytheemittance 
 ofsmokeorunpleasantsmellcanresultinreorelectricshock.Besuretoturno 
 thepowerswitchimmediatelyanddetachtheplugfromtheoutlet.Checkrsttobe
sure that the machine no longer produces smoke, and contact your local distributor
for repair. Repair by customers is dangerous so please never do it.
• Never disassemble or modify this machine. Disassembling or modifying either will
result in electric shock or malfunction of this machine.
• Keepngersandotherbodypartsawayfromhazardousmovingparts.
High Voltage Precaution to Avoid Personnel Shock or Fire
1.4 Installation Precaution
• Install the machine near an easily accessible electrical outlet.
• Do not provide power to the machine through the same power line as for other
noise generating devices such as motors.
• Connect the power cable directly to an electrical outlet. Use independent power
source.
Power Supply
• Do not place anything on the top of the machine.
• Do not lean body against or rest elbows on the machine.
• Open and close the top cover gently from the front of the machine with both hands.
• Before connecting or disconnecting the interface connector, turn the machine OFF.
Machine Handling
5