MIMAKI TX-Y6018P - Electrical Connection Requirements

• Alocationnearare
• Places exposed to direct sunlight
• Placessubjecttovibration
• Placessubjecttoextremechangesintemperatureorhumidity
• Places near an air conditioner or a heater
• Places where the machine may get wet
• Placesnearadiazocopierthatmaygenerateammoniagas
• Places with poor ventilation
• Unstable location
Do Not Install the Machine in the Following Places:
2.3 Electrical Connection Requirements
PowerSpecication:
Rated Voltage: 220VAC(±5%)
Rated currency: 40A
Input power frequency: 50/60HZ
Phase: Single-phase
• The machine should be grounded, according to the local safety
electrical regulation.
• The grounding should be less than 3V.
• Usespeciedanti-staticoormattingtominimizeharmfulstaticbuild  
up.
• Use ESD Ground Strap when handing any Electric Boards to avoid any
electric static discharge that may damage these parts.
• Do not open the cover where electrical spare parts are located to avoid
possible electrical shock.
Electrical Safety:
7