For outdoor use only
Factory set for use with Propane gas.
Nominal gas consumption at high/lower setting: Propane 37.7/18.0MJ/h
12.0 kgs.
Height: 123 cm including stand
With AGA, CE and CSA certificates
Gas inlet fitting: 1/4’ inverted flare type with internal O-ring seal.
6PCS M5 x 12 screw for stand and stand connectors
4pcs Self Taping Screws for burner head and tank housing body
4pcs M5X12 screw for tank housing body and stand
M6 Dome Nut for safety guard and burner head
Hose and regulator assembly
1.8 mm
Transportable terrace/garden heater
Gas hose connections with screw caps
B. Specifications
C. Table of openings
Assembly Parts and Procedures
Page 7
To Next Page
Loading...
Need help?
General