Mimosa Backhaul B5-Lite User Manual

Mimosa Backhaul Help Content
Mimosa Backhaul Single Client (PTP) Mode
Copyright © 2014 Mimosa Page 102
Reading Device Details
The Device Details panel shows two summary tables for the local and remote device configurations and their status.󰾬
Click on the navigation circles at the bottom of the panel to toggle between the two tables.
The table shows the following for both Local and Remote devices:
B5/B5c
Device Name: 󰾬The friendly name given to each device. (Set in Preferences > General > Naming)
●
Serial Number: The unique identifier for the device assigned at the factory.
●
IP Address: The IP address of each device and how it was assigned. (Set in Preferences > Management)
●
Wireless Protocol: The MAC level protocol. (Set in Wireless > Link > MAC Configuration)
●
TDMA Traffic Balance: Identifies the "gender" of the radio, the duration for each TDMA time slot, and ratio of
●
bandwidth allocated for transmission. (Set in Wireless > Link > MAC Configuration)
Ethernet Speed: Data rate and duplex mode of the wired Ethernet interface.
●
Firmware: The latest firmware version applied to each device. (Set in Preferences > Update & Reboot)
●
Internal Temp: Temperature inside the device casing (operating range: -40 °C to +60 °C).
●
2.4 GHz MAC: The unique identifier for the 2.4 GHz radio.
●
5 GHz MAC: The unique identifier for the 5 GHz radio.
●
Ethernet MAC: The unique identifier for the physical Ethernet interface.
●
Last Reboot: The date and time at which each device last rebooted.
●
B5-Lite
Device Name: 󰾬The friendly name given to each device. (Set in Preferences > General > Naming)
●
Serial Number: The unique identifier for the device assigned at the factory.
●
IP Address: The IP address of each device and how it was assigned. (Set in Preferences > Management)
●
Wireless Protocol: The MAC level protocol. (Set in Wireless > Link > MAC Configuration)
●
TDMA Traffic Balance: Identifies the "gender" of the radio, the duration for each TDMA time slot, and ratio of
●
bandwidth allocated for transmission. (Set in Wireless > Link > MAC Configuration)
Ethernet Speed: Data rate and duplex mode of the wired Ethernet interface.
●
Firmware: The latest firmware version applied to each device. (Set in Preferences > Update & Reboot)
●
CPU Temp: Temperature on the device CPU (operating range: -40 °C to +110 °C).
●
5 GHz MAC: The unique identifier for the 5 GHz radio.
●
Ethernet MAC: The unique identifier for the physical Ethernet interface.
●
Last Reboot: The date and time at which each device last rebooted.
●
B11
Device Name: 󰾬The friendly name given to each device. (Set in Preferences > General > Naming)
●
Serial Number: The unique identifier for the device assigned at the factory.
●
IP Address: The IP address of each device and how it was assigned. (Set in Preferences > Management)
●
Wireless Protocol: The MAC level protocol. (Set in Wireless > Link > MAC Configuration)
●
TDMA Traffic Balance: Identifies the "gender" of the radio, the duration for each TDMA time slot, and ratio of
●
bandwidth allocated for transmission. (Set in Wireless > Link > MAC Configuration)
Ethernet Speed: Data rate and duplex mode of the wired Ethernet interface.
●
Network Interface: Shows port status; "Ethernet", "Fiber" or "Down".
●
Firmware: The latest firmware version applied to each device (Set in Preferences > Update & Reboot).
●
Internal Temp: Temperature inside the device casing (operating range: -40 °C to +60 °C).
●
5 GHz MAC: The unique identifier for the 5 GHz radio.
●
Ethernet MAC: The unique identifier for the physical Ethernet interface.
●

Mimosa Backhaul B5-Lite Specifications

General

Brand	Mimosa
Model	Backhaul B5-Lite
Category	Network Hardware
Language	English