Designed to be used everywhere
The X-TERRA models were designed from the start with the user
in mind, meaning
Menus that make sense
Strategically located buttons - easy to understand and operate.
Include a wide range of automatic settings covering every
imaginable detecting situation and superb, stable handling.
If you prefer a more “hands-on” approach you’ll love the
X-TERRA models’ manual controls with direct button access
to all the important functions from Sensitivity to Threshold to
manually Ground Balancing on land and in the innovative Beach
Ground Balance Mode (X-TERRA 705 only). The X-TERRA series has the ability to grow with the user and has a
feature list long enough to satisfy even the most demanding detector fan.
It’s all about the coil!
The VFLEX Advantage
The Minelab VFLEX system is the only coil initiated frequency shift system on the market today and offers the
best range of coils available and, each additional coil acquired is perfectly matched to your X-TERRA 305, 505 and
705. VFLEX offers the unique feature of utilising one control box and having the option to acquire, t and use as one
wishes on both ‘turf & surf’, offering super results by being able to hone in on targets of a very low to medium, to a very
high conductivity; whether deep, shallow, large or small.
1. Medium Frequency 7.5Khz – great general purpose search coil which should cover most searcher’s needs –
good depth – great discrimination – sharp accurate signals.
2. High Frequency 18.75Khz – the prospector’s frequency of choice for seeking out even the smallest gold nuggets
and for detectorists seeking small, low conductive targets typically at shallow depths or angled inside plow furrows
that would ordinarily be difcult targets with other set-ups. These HF coils are also “hot performers” for small gold
jewellery targets and chains in salt-water areas. Since high frequency coils are more sensitive to smaller targets
users should be aware they can sometimes signal more ferrous (unwanted) items. High frequency coils will
not penetrate as deeply as low or medium frequency coils. The extra sensitivity to gold and small silver generally
compensates for any loss of depth which may result.
3. Low Frequency 3Khz – great for high conductive targets typically at deeper levels and for being less sensitive to
small low conductive trash such as broken up metal shards. Great for Cache hunting!
To Next Page
Loading...
Need help?
General
