Minelab X-Terra 305 User Manual

Instruction Manual
Field Guide
Turn on (p. 20)
Choose a Discrimination Pattern (pp. 30–35)
Adjust Sensitivity (p. 46) and Volume (p. 52)
Choose a Noise Cancel channel (p. 48)
Adjust Ground Balance (p. 56)
Begin detecting!
These quick start instructions allow you
to begin detecting straight away and nd
important reference information for setting
up your X‑TERRA.
Minelab encourages all users to read the entire
manual to ensure a complete understanding
of all the X‑TERRA features and functions.
Power
Turns the detector On/Off.
Patterns
Scrolls through the different
Discrimination Patterns.
All Metal
Toggles between the
selected discrimination
pattern and the All Metal
pattern.
Minus
Adjusts settings, and scrolls
to the left through the
discrimination segments.
Menu
Enters the Menu.
Accesses and scrolls through
the detecting settings.
Plus
Adjusts settings, and scrolls
to the right through the
discrimination segments.
Pinpoint/Detect
Pinpoint assists in locating
the exact position of a target
prior to recovery.
Detect exits menu settings
and returns to detection.
Accept/Reject
Accepts or rejects
discrimination segments.
Ground Balance
Accesses the Ground Balance
Menu.

Minelab X-Terra 305 Specifications

General

Brand	Minelab
Model	X-Terra 305
Frequency	7.5 kHz
Ground Balance	Automatic
Pinpoint	Yes
Display	LCD
Type	VLF
Search Coil	9"
Search Modes	3
Audio Output	Speaker and headphone
Discrimination	Adjustable
Audio Tones	3
Battery Type	4 x AA
Battery Life	Approximately 20 hours
Length	Adjustable
Waterproof	Search coil submersible
Weight	1.3 kg (2.9 lbs)
Warranty	3 years

Summary

Assembling Your X-TERRA

Connecting the Coil

Steps for attaching the metal detector coil to the shaft assembly, including securing components.

Shaft Assembly Guide

Instructions on how to assemble and adjust the detector's shaft sections for optimal length.

Armrest Assembly

Procedure for attaching the armrest to the upper shaft, ensuring proper fit and comfort.

Connecting the Control Box

Guide on how to attach the main control box unit to the detector's handle.

Coil Cable Assembly

How to neatly wind and secure the coil cable along the detector shaft.

Inserting Batteries

Detailed steps for correctly installing AA batteries into the detector's control box.

Holding the Detector Properly

Introducing the Control Panel

Turning on the Detector

How Metal Detectors Work

Preset Discrimination Patterns

Pinpointing Target Location

Recovering Detected Targets

Understanding LCD Icons

Detector Operation Modes

Selecting Menu Settings

Sensitivity Adjustment

How to Adjust Sensitivity

Procedure for fine-tuning the detector's sensitivity level for optimal performance.

Noise Cancel Function

Choosing a Noise Cancel Channel

Threshold Setting

Adjusting the Threshold Level

Volume Control

How to Adjust Volume

Tone Settings

Ground Balance

Adjusting Ground Balance

Editing Discrimination Patterns

Erasing Custom Patterns

Restoring Factory Presets

Error Messages and Solutions

Battery Behaviour and Care

Care and Maintenance of Your X-TERRA