Minelab X-TERRA705

Press & hold Menu button ( ), plus press Power button ( ) to reset detector.
After Factory Preset, repeat Step 2, 3, 4.
432      
Après un réglage usine, répétez les étapes 2, 3, 4.
Baada ya Kuweka upya Mipangilio ya Kiwandani,
rudia hatua ya 2, 3, 4.
Pressez et maintenez le bouton Menu ( ), tout en pressant le bouton Mise en marche ( )
afin de réinitialiser le détecteur.
   ( )      ( )      
Bonyeza na ushikilie kitufe cha Menyu ( ), pia bonyeza kitufe cha Nishati ( )
kuweka upya kigunduzi.
Contact
Europe, Middle East & Africa
T: +353 21 423 2352
E: minelab@minelab.ie
North, South & Central America
T: +1 630 401 8150
E: info@minelabamericas.com
www.minelab.com
Australia, Asia & Oceania
T: + 61 8 8238 0888
E: minelab@minelab.com.au
Quick Start Guide
Guide de démarrage rapide Kiongozi cha Kuanza Haraka

Trouble Shooting
Dépannage

Kusuluhisha
Factory Preset

Réglages usine Uwekaji upya mipangilio ya Kiwandani
Read Instruction manual on how to increase performance through advanced features.
Lire le manuel d’instruction pour savoir comment améliorer les performances à l’aide des fonctions avancées.
Soma kitabu cha maagizo kuhusu jinsi ya kuongeza utendakazi kupitia vipengee mahiri.
Fondamentaux de la détection

Misingi ya Ugunduzi
Secure cable to shaft
Sweep level
Sweep slowly
Overlap sweep
Refill hole
Keep metal away from coil
     ٌ
 
  
 
  
    
Enroulez le câble autour du manche
Balayez à niveau
Balayez lentement
Balayage chevauchant
Rebouchez vos trous
Eloignez les objets métalliques du disque
Funga kebo kwenye mtaimbo
Kiwango cha upitishaji
Pitisha polepole
Pishanisha upitishaji
Jaza shimo upya
Weka chuma mbali na koili
Detecting Basics
          
Move apart
Recommended 25m
 
 25  
Séparez-vous
25 m recommandés
Tenganisha
Mita 25 zinazopendekezwa
4901-0150

Minelab X-TERRA705 Specifications

General

Brand	Minelab
Model	X-TERRA705
Category	Metal Detector
Language	English

Summary

Detecting Basics

Secure Cable to Shaft

Secure the detector's cable to the shaft for stability during use.

Keep Metal Away From Coil

Ensure metal objects are kept clear of the search coil to prevent interference.

Move Apart

Move away from detected metal objects to avoid signal interference.

Troubleshooting Factory Reset

Factory Preset

Reset the detector to its factory default settings for troubleshooting.

Fundamental Detection Principles

Sweep Level

Sweep the detector coil horizontally at a consistent height above the ground.

Sweep Slowly

Move the detector coil slowly to ensure thorough detection of targets.

Overlap Sweep

Overlap search coil passes to ensure complete ground coverage.

Refill Hole

Replace excavated soil neatly after searching for the target.

Getting Started with X-TERRA 705

Power On

Turn on the metal detector by pressing the power button.

Prospecting Mode Selection

Confirm or switch to the Prospecting Mode for gold detection.

All Metal Mode Selection

Select the All Metal mode for general detection purposes.

Ground Balance and Tracking

Set up ground balance and tracking for optimal performance.

Start Detecting

Begin your metal detecting session after all settings are confirmed.