Need help?Do you have a question about the Minelab X-TERRA Series and is the answer not in the manual?
General| Category | Metal Detector |
|---|---|
| Technology | VFLEX |
| Display | LCD |
| Pinpoint Mode | Yes |
| Weight | 1.3 kg (2.9 lbs) |
| Battery | 4 x AA |
| Target ID | Yes |
| Ground Balance | Manual and Automatic |
| Discrimination | Yes |
| Sensitivity Adjustment | Yes |
| Battery Life | 20 hours |
| Frequency | Multi-frequency (3 kHz, 7.5 kHz, 18.75 kHz) |
| Audio Tones | Multi-tone |
| Waterproof | Coil only |
Steps for attaching the metal detector coil to the shaft assembly.
Instructions for assembling the lower, middle, and upper shaft sections.
Procedure for attaching the armrest to the upper shaft.
Guide on how to connect and disconnect the control box.
Instructions for managing the coil cable and inserting batteries.
Controls for turning on/off and selecting operating modes.
Buttons for adjusting settings and navigating menus.
Functions for target location and soil compensation.
Shows target identification numbers and depth estimation.
Displays current operating mode and discrimination patterns.
Indicates battery level and system status.
Buttons for device power, modes, and all metal selection.
Controls for settings, Iron Mask, and segment adjustments.
Functions for target location and menu access.
Activates ground balance adjustment for soil conditions.
Shows target numbers and discrimination levels.
Displays active modes and discrimination patterns.
Indicates adjustable settings, reject status, and battery.
Visual guides for settings adjustment and target depth.
Details transmission, technology, coil, audio, and battery specs.
Compares features across X-TERRA 305, 505, and 705 models.
Details compliance with FCC rules for Class B digital devices.
States compliance with EU directives for radio equipment.
Notes the intended use and limitations of the metal detector.
To Next Page