Minelab X-Terra 305 - Error Messages and Solutions

66
ERROR MESSAGES
1
1
1
2
3
4
5
AL
1
2
3
4
5
AL
Coil Unplugged
The coil has been
disconnected from
the detector.
Coil Error
The coil is not
communicating with
the control box.
Coil Incompatible
The coil is
communicating with
the control box but
the detector is not
recognising it.
1
1
1
2
3
4
5
AL
Overload
The detector has
received a signal that
is too strong for it
to interpret. This will
appear until there is no
more overload.
The menu scale
line icon will slowly
flash until the coil is
plugged back in.
Turn the detector off
before connecting a
standard coil.
Take the coil away
from the source of
overload.
Once all errors are resolved the
detector will begin operation with a
blank detection screen.