Name Quantity Name Quantity
Camera 1 piece Car Adapter 1 piece
USB cable 1 piece 3M sticker 4 pieces
Cable Clip 1 bag User Manual 1 piece
Film 1 piece Lens Cleaning
Cloth
1 piece
CPL optional GPS mount optional
CPU (mount) optional Hardwire Kits optional
Remarks:
Methods of pasting the FILM:
1. Spray some water on the place that the FILM will be pasted on, and then use a dry
towel to clean it;
2. Tear off the FILM, then paste it to the right place.
3. After you have adjusted the location well, you can use a scratch board or
something else flat to slick the film and squeeze the water inside out until there is
no bubble or water in it.
4. Then put 3M sticker onto the film, then if you want to remove bracket, it is easy,
just remove the FILM.
NOTE: Alterations reserved.
About the Manual
We have tried our best to make sure that what in this manual is right and updated.
To Next Page
Loading...
Need help?
General
