EasyManua.ls Logo

Mini 2016 Convertible - Cargo Area; The Concept

Mini 2016 Convertible
252 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
stowed, which do not fit through the loading
opening in the normal position.
1. Unlock the convertible top using the han‐
dles, arrows 1.
2. Lift convertible top, arrow 2.
3. Fold back the handles and place on the
brackets, arrows 3.
Lower the convertible top again and lock it be‐
fore continuing on your trip.
1.
Remove handles from the brackets.
2. Push convertible top down and hold.
3. Push the handles outward to lock the con‐
vertible top.
4. Check that the convertible top is locked.
Expanding the cargo area volume
With the convertible top closed, the cargo area
volume can be expanded.
1.
Fold the convertible top upward as descri‐
bed under Loading aid, refer to page 157.
2. Swivel the cargo cover upward and remove
backward from the lower supports, see ar‐
rows 1.
3. Insert the cargo cover into the upper sup‐
ports, arrows 2, until it engages and place
down horizontally.
The loading aid cannot be locked, if the
cargo cover is not fully inserted into the up‐
per supports.
4. Fold the convertible top downward as de‐
scribed under Loading aid, refer to
page 157, and lock it.
Return the cargo cover into the lower position
so that the convertible top can be used.
Cargo area
Enlarging the cargo area
The concept
The cargo area can be enlarged by folding
down the rear seat backrest.
The rear seat backrest is divided into two parts
at a ratio of 50 to 50.
The sides can be folded down separately or to‐
gether.
Information
WARNING
Danger of jamming with folding down the
backrests. There is a risk of injuries or a risk of
property damage. Make sure that the area of
movement of the rear backrest and the of the
head restraint is clear prior to folding down.
WARNING
The stability of the child restraint system
is limited or compromised with incorrect seat
adjustment or improper installation of the child
seat. There is a risk of injury or danger to life.
Make sure that the child restraint system fits
securely against the backrest. If possible, adjust
the backrest tilt for all affected backrests and
correctly adjust the seats. Make sure that seats
and backrests are securely engaged. If possible,
Seite 158
CONTROLS
Interior equipment
158
Online Edition for Part no. 01 40 2 969 276 - II/16

Table of Contents

Related product manuals