If have difficulties removing the cover, per‐
form step 3 first.
3. Pull sensor from the cover, arrow, and place
it on the side trim.
4. Loosen and remove the second screw, ar‐
row, using the hexagonal wrench.
5. Slightly lift the side frame, arrow 1, and pull
sensor with cable forward out from the
guide, arrow 2.
Swivel the cable out sidewards so it cannot
be jammed.
6. Unlock the second side frame. The sensor is
located on the left side of the vehicle.
Closing the convertible top
1.
Grasp the convertible top with two people,
with both hands on the two side frames.
2. Lift out the convertible top evenly on both
sides and swivel forward onto the wind‐
shield panel.
To lift out the convertible top, pull firmly on
the side frame, if necessary.
3. In the vehicle, lift the cover in the center of
the roof using the screwdriver.
4. For this purpose, insert the hexagon
wrench into the designated receptacle in
the center of the roof and press push up‐
ward, arrow 1.
Seite 51
Opening and closing
CONTROLS
51
Online Edition for Part no. 01 40 2 969 276 - II/16
To Next Page
Loading...
