watch, for example, LAP 1 with the meas‐
ured time. The stop watch continues run‐
ning in the background.
3. If needed, press button, arrow 3, again to
measure a further lap time.
Calling up lap times
1. Press button, arrow 1, repeatedly until
LAP 1 is shown on the display.
2. Press button, arrow 2, to call up the individ‐
ual lap times.
Deleting lap times
1.
Press button, arrow 1, repeatedly until
LAP 1 is shown on the display.
2. Press button, arrow 3, to delete all stored
lap times.
Displaying the time
The time is copied from the instrument cluster.
Press button, arrow 1, repeatedly until the time
is displayed.
Seite 99
Displays
CONTROLS
99
Online Edition for Part no. 01 40 2 969 276 - II/16
To Next Page
Loading...
