2.5.6 Setting the White Balance
In the menu select ‘White Balance’, then press OK button to enter, use the UP and DOWN
buttons to scroll through options and press OK to confirm (Auto, Sunny, Incandescent,
Florescent, Cloudy).
2.5.7 Setting the AV Output Format
In the menu select ‘TV Type’, then press OK button to enter, use the UP and DOWN buttons
to scroll through options and press OK to confirm. (NTSC / PAL )
2.5.8 Setting Auto Power Off time
In the menu select ‘Auto Power Off’, then press OK button to enter, use the UP and DOWN
buttons to scroll through options and press OK to confirm. (OFF, 1min, 3min, 5min)
2.5.9 Setting Date Time Display
In the menu select ‘Date Time Display’, then press OK button to enter, use the UP and
DOWN buttons to scroll through options and press OK to confirm. (OFF / Date / Time / Date
& Time)
2.5.10 Enabling Motion Detection
The dash camera starts recording when motion is detected in standby mode this can be
helpful for recording accidents when the vehicle is parked and unattended, i.e. hit and run
on parked cars etc. (if this setting is ‘on’ the dash camera will not power off automatically, it
will only go on standby mode)
Please don’t leave the dash camera under sunlight with the Motion Detection function
working, which may damage the camera due to the high temperature in your car in summer.
In the menu select ‘Motion Detection’, then press OK button to enter, use the UP and
DOWN buttons to scroll through options and press OK to confirm. (ON / OFF)
2.5.11 Setting Power Off Screen time
In the menu select ‘Power Off Screen’, then press OK button to enter, use the UP and
DOWN buttons to scroll through options and press OK to confirm. (OFF / 1min / 3min / 5min)
2.5.12 Setting Video Recording Mode
In the menu select ‘Video Recording Mode’, then press OK button to enter, use the UP and
DOWN buttons to scroll through options and press OK to confirm. (Video & Audio / Video
Only)
To Next Page
Loading...
