6.12 Reset
If the camera can’t work or freeze, you can try to long press RESET button to reset it.
6.13 Resolution
Here you can choose the video resolution you want to use; higher resolution videos will
take more storage space.
Options: 1920*1080 30P 16:9 1280*720 60P 16:9 1280*720 30P 16:9
6.14 Quality
Here you can adjust the video quality; the quality will affect video grain, sharpness,
contrast and so on. Better quality videos will result in higher bit rate and take more storage
space.
Options: Normal / S.Fine (super fine) / Fine
6.15 AE Meter Mode
Here you can set the measuring area for Auto Exposure; this setting will affect the video
brightness and quality. CENTER is recommended if there is no special requirement.
Options: Center / Average / Spot
6.16 WDR
Options: ON / OFF
6.17 ADAS Detect / ADAS Calibration
ADAS: LDWS (Land Departure Warning System)
FCW (Forward Collision Warning)
FCMD (Forward Car Motion Detection)
Options: ON / OFF
6.18 Flicker
Here you can set the sensor flicker frequency to fit your AC power frequency and reduce
the effect of flickering lamps. Please leave it AUTO if you don’t know which frequency is in
use in your country.
Options: Auto / 60hz / 50hz
6.19 White Balance
Here you can set the image white balance mode to improve color balance in videos /
images in different weather and lighting conditions. Auto is recommended to fit most
conditions.
Options: Auto / Sunny / Cloudy / Tungsten / Fluorescent
6.20 Exposure Values (EV)
Here you can manually adjust the Exposure Values (EV) to improve the image brightness.
Options: 0 / +0.3 / +0.7 / +1.0 / +1.3 / +1.7 / +2.0 / -2.0 / -1.7 / -1.3 / -1.0 / -0.7 / -0.3
To Next Page
Loading...
Need help?
General