Vehicle location
The user can find the parked vehicle easily
by using the ACE 3.0 app. When the product
switches to Parking mode while connected to the
ACE 3.0 app, the pictures and videos taken by
the front and rear camera (optional) are saved in
the ACE 3.0 app, and the location of the vehicle
is displayed on a digital map (may vary according
to national law).
To use this feature, the product's GPS signal
must be activated when switching to the Parking
mode.
Pictures taken by the front and rear
camera and the location on the map (if
the GPS feature is turned on) will be
saved in the ACE 3.0 app until you use
this feature again.
Using voice recognition
Voice recognition is a hands-free solution
which can be used to control the camera in
different situations. This feature is available in the
following languages: English, German, Korean,
Chinese & Japanese.
Voice recognition can be turned on or off
on the ACE 3.0 Pro display by selecting:
Settings > System Settings > Voice
recognition.
Alternative:
By holding the microphone button ( ) for
at least 3 seconds.
12
To Next Page
Loading...
Need help?
General
