– Set the parking brake.
– On uphill grades or on a downhill
slope, turn the front wheels in the di-
rection of the curb.
– On uphill grades or on a downhill
slope, also secure the vehicle, for in-
stance with a wheel chock.
NOTICE
When shifting to a lower gear, excessive
speeds can damage the engine. There is a
risk of damage to property. When shifting
into 5th or 6th gear, press the gearshift
lever to the right.
Schematic diagram
– 1 – 6: forward gears
– R: reverse
Shifting
General information
Depending on the engine installation, the
engine speed during a shifting operation is
adjusted automatically as required for har-
monious and dynamic gear shifting.
Reverse gear
Select only when the vehicle is stationary.
To overcome the resistance push the gear-
shift lever dynamically to the left and en-
gage reverse gear with a forward shifting
movement.
Rolling or pushing the vehicle
In some situations, the vehicle is to roll
without its own power, for instance in a ve-
hicle wash, or be pushed.
1. Switch on the ignition.
2. Press on the clutch pedal and shift out
of a forward gear or reverse.
3. Release the parking brake.
Steptronic transmission
Concept
The Steptronic transmission combines the
functions of an automatic transmission with
the possibility of manual shifting, if needed.
Safety information
WARNING
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of an
accident. Before exiting, secure the vehi-
cle against rolling.
In order to ensure that the vehicle is se-
cured against rolling away, follow the fol-
lowing:
– Set the parking brake.
– On uphill grades or on a downhill
slope, turn the front wheels in the di-
rection of the curb.
– On uphill grades or on a downhill
slope, also secure the vehicle, for in-
stance with a wheel chock.
Seite 119
Driving CONTROLS
119
Online Edition for Part no. 01402723718 - VI/18
To Next Page
Loading...
Need help?
General
