Technical data
Vehicle features and options
This chapter describes all standard, country-
specific and optional features offered with
the series. It also describes features that are
not necessarily available in your vehicle,
e. g., due to the selected options or country
versions. This also applies to safety-related
functions and systems. When using these
functions and systems, the applicable laws
and regulations must be observed.
General information
The technical data and specifications in this
Owner's Manual are used as guidance val-
ues. The vehicle-specific data can deviate
from this, for instance due to the selected
special equipment, country version or coun-
try-specific measurement method. Detailed
values can be found in the approval docu-
ments, on labels on the vehicle or can be ob-
tained from a dealer’s service center or an-
other qualified service center or repair
shop.
Dimensions
The dimensions can vary depending on the
model version, equipment or country-spe-
cific measurement method.
The specified heights do not take into ac-
count attached parts, for instance a roof an-
tenna, roof racks or spoiler. The heights can
deviate, for instance due to the selected
special equipment, tires, load and chassis
version.
MINI 3-door
Width with mirrors inches/mm 76.1/1,932
Width without mirrors inches/mm 68/1,727
Height inches/mm 55.7/1,414
Length inches/mm 151.1-152.5/3,837-3,874
Wheelbase inches/mm 98.2/2,495
Smallest turning radius diam. ft/m 35.5/10.8
Seite 304
REFERENCE Technical data
304
Online Edition for Part no. 01402723718 - VI/18
To Next Page
Loading...
Need help?
General
