Instrument lighting
Functional requirement
The parking lights or low beams must be
switched on to adjust the brightness.
Settings
Adjust the brightness with the
thumbwheel.
Interior lights
General information
Depending on the equipment, the interior
lights, footwell lights, entry lights, and cour-
tesy lights are controlled automatically.
Thumbwheel for the instrument lighting
controls brightness of some of these fea-
tures.
Overview
1 Interior lights
2 Reading lights
3 Ambient light
Switching the interior lights on/off
Press button.
To switch off permanently: press the button
and hold for approx. 3 seconds.
Switching the reading lights on and
off manually
Press button.
The reading lights are located in the front
next to the interior light.
Ambient light
General information
Depending on the equipment version, light-
ing can be adjusted for some lights in the
car's interior.
Activating/deactivating
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Lighting"
4. "Interior lighting"
5. "Ambient lighting"
6. Select the desired setting.
Settings are stored for the profile currently
used.
Changing color
Push the switch forward or back:
manual color change.
Press the switch forward or back-
ward and hold for approx. 3 seconds,
until the ambient light illuminates
Seite 151
Lights CONTROLS
151
Online Edition for Part no. 01402723718 - VI/18
To Next Page
Loading...
Need help?
General
