Adding
1. Let the engine cool.
2. Open the hood.
3. Turn the lid of the coolant reservoir
slightly counterclockwise to allow any
excess pressure to dissipate, then open
it.
4. If the coolant is low, slowly add coolant
up to the specified level; do not overfill.
5. Close the cap.
6. Have the cause of the coolant loss elimi-
nated as soon as possible.
Disposal
Comply with the relevant environ-
mental protection regulations when
disposing of coolant and coolant ad-
ditives.
Seite 275
Coolant MOBILITY
275
Online Edition for Part no. 01402723718 - VI/18
To Next Page
Loading...
