The distance to the destination is adopted
automatically.
Arrival time
Depending on the vehicle equipment, the
estimated arrival time is displayed if a desti-
nation is entered in the navigation system
before the trip is started.
The prerequisite is that the time must be
correctly set.
Instrument cluster without additional
functions: Speed Limit Info
Speed Limit Info shows the current max-
imum permitted speed in the instrument
cluster.
On-board computer on the control
display
Principle
The on-board computer displays different
vehicle data on the control display, such as
average values.
General information
Two types of on-board computers are availa-
ble on the control display:
– "Onboard info": average values, such as
the consumption, are displayed. The val-
ues can be reset individually.
– "Trip computer": the values deliver an
overview of a specific distance covered
and can be reset as often as necessary.
Calling up the on-board computer or
trip computer
Via the Central Information Display (CID):
1.
"My MINI"
2. "Driving information"
3. "Onboard info" or "Trip computer"
Resetting the on-board computer
Via the Central Information Display (CID):
1.
"My MINI"
2. "Driving information"
3. "Onboard info"
4. "Consumption" or "Speed"
5. "OK"
Resetting the trip computer
Via the Central Information Display (CID):
1. "My MINI"
2. "Driving information"
3. "Trip computer"
4. Tilt the Controller to the left, if needed.
– "Reset": all values are reset.
– "Automatic reset": all values are
reset approx. 4 hours after the vehi-
cle has come to a standstill.
5. If necessary, "OK"
Driving Excitement
Principle
On the control display, sport instruments
can be displayed, and the vehicle condition
can be checked before the use of the SPORT
program.
Sport instruments
General information
On the control display, values for power and
torque are displayed.
Seite 138
CONTROLS Displays
138
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
