GREEN info
The achieved range extension may be dis-
played as a bonus range.
Average fuel consumption
The average consumption is calculated for
the period while the engine is running.
The average consumption is calculated for
the distance traveled since the last reset by
the on-board computer.
Average speed
Periods in which the vehicle is parked
with the engine manually stopped are not
included in the calculation of the average
speed.
Resetting average values
Press and hold the button on the turn signal
lever.
Engine temperature display
Principle
The current engine temperature, based on
a combination of coolant and engine oil
temperature is displayed. As soon as the
optimum operating temperature has been
attained, the indicator is in the center posi-
tion.
General information
If the engine oil or coolant, and thus the
engine, become too hot, a Check Control
message is displayed too.
When the engine temperature is
too high, a red indicator light is dis-
played.
When the engine oil temperature is
too high, a red indicator light is dis-
played.
To check the coolant level, refer to
page 279.
Instrument cluster without enhanced
features: display
Instrument cluster with enhanced
features: display
Distance to destination
Depending on the vehicle equipment, the
distance remaining to the destination is dis-
played if a destination is entered in the nav-
igation system before the trip is started.
Seite 137
Displays CONTROLS
137
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
