On-board computer
Principle
The on-board computer displays different
vehicle data in the instrument cluster, such
as average values.
Calling up information
Press the button on the turn signal lever.
Information is displayed in the instrument
cluster.
Information at a glance
Repeatedly pressing the but-
ton on the turn signal lever
calls up the following informa-
tion:
– Range.
– GREEN Info.
When GREEN Mode is activated.
– Average consumption, fuel.
– Average consumption since delivery
from the factory.
– Current consumption, fuel.
– Average speed.
– Date.
– Engine temperature display.
– With equipment version with Head-up
display and navigation:
Distance to destination.
When destination guidance is activated
in the navigation system.
– With equipment version with Head-up
display and navigation:
Arrival time.
When destination guidance is activated
in the navigation system.
– Instrument cluster without enhanced
features:
Speed Limit Info.
– Vehicle speed.
– Trip odometer.
The unit of measurement of some informa-
tion can be changed.
Setting units of measurement, refer to
page 48.
Selecting information
Depending on the vehicle equipment, you
can select what information from the on-
board computer can be accessed in the in-
strument cluster.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Displays"
4. "Instrument panel"
5. Select the desired setting.
Settings are stored for the profile currently
used.
Information in detail
Range
Displays the estimated cruising range avail-
able with the remaining fuel.
The range is calculated based on your driv-
ing style over the last 20 miles/30 km.
Seite 136
CONTROLS Displays
136
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
