EasyManua.ls Logo

Mini HARDTOP 2 DOOR 2023 - Page 147

Mini HARDTOP 2 DOOR 2023
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Activating
Switch position:
The indicator light in the instrument clus-
ter is illuminated when the low beams are
switched on.
System limits
The automatic headlight control cannot re-
place your personal judgment of lighting
conditions.
For example, the sensors are unable to de-
tect fog or hazy weather. In these situa-
tions, turn the lights on manually.
Daytime driving lights
General information
Switch position:
,
Depending on the national-market ver-
sion:
The daytime driving lights illuminate when
the ignition is switched on.
Depending on the national-market version:
after switching off the ignition, the parking
lights will illuminate in position .
Activate/deactivate
In some countries, daytime driving lights
are mandatory, so it may not be possible to
deactivate the daytime running lights.
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. Select the desired setting.
Settings are stored for the currently used
vehicle key.
Cornering light
General information
Switch position:
In tight curves, for instance on mountain-
ous roads or when turning, an additional
cornering light is switched on that illumi-
nates the inside of the curve when the vehi-
cle is moving below a certain speed.
The cornering light is automatically
switched on depending on the steering-
wheel angle or, where applicable, the use
of turn signals.
When driving in reverse, the cornering
lights may be automatically switched on re-
gardless of the steering-wheel angle.
Adaptive headlight range con-
trol
The adaptive headlight range control fea-
ture balances out acceleration and braking
processes as well as the vehicle load condi-
tions in order to avoid blinding oncoming
traffic. Illumination of the road is optimized.
Automatic High Beam Assis-
tant
Principle
The Automatic High Beam Assistant detects
other road users early on and automatically
switches the high beams on or off depend-
ing on the traffic situation.
General information
The Automatic High Beam Assistant en-
sures that the high beams are switched on,
whenever the traffic situation allows. In the
Seite 147
Lights CONTROLS
147
Online Edition for Part no. 01405A7DAD4 - II/23

Related product manuals