Deleting stored functions
All stored functions will be deleted. The
functions cannot be deleted individually.
Press and hold the two outer buttons on the
interior mirror simultaneously for approxi-
mately 10 seconds until the LED on the
interior mirror flashes green fast.
Digital compass
Overview
1 Adjustment knob
2 Mirror display
Mirror display
The compass shows the current driving di-
rection.
Operating concept
Various functions can be called up by press-
ing the adjustment knob with a pointed
object, such as the tip of a ballpoint pen
or similar object. The following adjustment
ranges are displayed in succession, depend-
ing on how long the adjustment knob is
pressed:
– Pressed briefly: turns display on/off.
– 3 to 6 seconds: compass zone setting.
– 6 to 9 seconds: compass calibration.
– 9 to 12 seconds: left/right-hand drive
setting.
– 12 to 15 seconds: language setting.
Setting the compass zones
Sets the particular compass zones on the ve-
hicle so that the compass operates correctly;
refer to World map with compass zones.
Seite 215
Interior equipment CONTROLS
215
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
